Team Group T-Force Cardea Zero Z440 2TB Internal PCI-E M.2 Gen4x4 SSD
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
  • Delivery
    Across Qatar
  • 99% Customers
  • Complete
    Servicing Available
  • Payment
    Secure System
  • Only Best

Team Group T-Force Cardea Zero Z440 2TB Internal PCI-E M.2 Gen4x4 SSD

Available: In Stock
QAR 1,899.00
  • Order within

Description :


The T-FORCE CARDEA ZERO Z440 M.2 NVMe PCIe SSD uses the PCIe Gen4 x4 interface and complies with the NVMe 1.3 standard. The sequential read/write speed can reach up to 5,000/4,400 MB/s.[1] Less than 0.2mm thick, the patented graphene copper foil thermal conductive material can effectively eliminate devices interference during installation. It can be installed on all major motherboard and M.2 slots.

[1] The performance result is tested on a motherboard that supports PCIe 4.0 interface by the T-FORCE internal laboratory. The actual speed may vary depending on the software and hardware conditions of the platform.


T-FORCE CARDEA ZERO Z440 SSD uses 3D flash memory which is stacked in a three-dimensional way to offer up to 1TB/2TB of large storage. As for the speed improvement, it is nearly 10 times faster than SATA SSD, and nearly 1.65 times faster than the M.2 PCIe Gen3 x4 SSD. In addition, it is completely downward compatible with the current PCIe 3.0 platform, improving gamers’ performance for gaming and daily work.


These products use graphene copper foil heat spreaders. The well-proportioned design of each SSD completely fits with the covered heat sink fan set of an X570 motherboard. Moreover, the cooling module on this motherboard can enhance the CARDEA ZERO Z440's heat dissipation. Even without the cooling module of the motherboard, it can still transfer heat sources effectively, showing excellent heat dissipation capability and allowing gamers to enjoy high-speed performance.


After T-FORCE’s long and rigorous internal laboratory tests and burn-in test, the patented graphene copper foil thermal conductive material on T-FORCE CARDEA ZERO Z440 SSD has been developed and is able to provide more than 9%[2] of cooling effect during actual continuous reading/writing for over 3 hours. Thermal conduction (graphene), thermal radiation (graphene) and thermal capacity (copper), these three elements can perfectly showcase an excellent heat dissipation performance.

[2] The experimental data is based on T-FORCE internal laboratory's test result. Under the same condition, the temperature test data is according to the comparison of the non-heat spreader M.2 PCIe Gen4 x4 SSD and the T-FORCE CARDEA ZERO Z440 SSD. The relevant test environment is simulated under a fanless environment using mask. The actual speed may vary depending on the software and hardware conditions of the platform.


T-FORCE CARDEA ZERO Z440 SSD supports S.M.A.R.T function and its built-in smart algorithm management mechanism has functions such as GC (garbage collection), TRIM command, LDPC (Low Density Parity Check Code) error correction mechanism, E2E Data Protection, etc. which are able to help in operation efficiency, prolong the service life of the SSD, while also allowing gamers to ensure data security, maximize its performance and the stability of data transfer.


  • M.2 NVMe PCIe Gen4 x4 solid state drive. Supports the latest platform AMD X570

  • Excellent performance – Read speed is up to 5,000 MB/s. Enhances the speed and performance of the overall system

  • Three heat dissipation elements - the combination of graphene and copper can provide excellent heat dissipation. 0.2mm ultra-thin and patented cooling module can avoid interference during installation

  • Multiple protection, smart management technology – effectively monitors the status of solid state drive and maximizes its performance

  • Product warranty – five-year product warranty with free technical support service


Interface PCIe Gen4 x4 with NVMe 1.3
Capacity 1TB/2TB[1]
Voltage DC +3.3V
Operation Temperature 0℃~70℃
Storage Temperature -40℃~85℃
Terabyte Written 1TB/ >1,800TB
2TB/ >3,600TB[2]
Performance Crystal Disk Mark:
1TB Read/Write: up to 5,000/4,400 MB/s
2TB Read/Write: up to 5,000/4,400 MB/s[3]
1TB Read/Write: 750K/750K IOPS Max
2TB Read/Write: 750K/750K IOPS Max[3]
Weight 9g
Dimensions 80.0(L) x 22.0(W) x 3.7(H) mm
Humidity RH 90% under 40°C (operational)
Vibration 80Hz~2,000Hz/20G
Shock 1.500G/0.5ms
MTBF 1,700,000 hours
Operating System System Requirements:
  • Windows 10 / 8.1 / 8 / 7 / Vista[4]
  • Linux 2.6.33 or later